The Milwaukee Advantage
The 4253-1 electromagnetic drill motor features 6.2 amps and a 1/2 in. chuck turning at 600 rpm. This motor is best used on the 4202 fixed position base. Light weight and ample power make this a good choice for smaller holes into steel.
1/2 inch capacity, 6.2 amp motor, 600 RPM
1/2 inch keyed chuck
Taps up to 5/8 inch -18 threaded hole. 5/8-11 and 1/2-13 taps not recommended
Develops up to 1650 pounds of drill point pressure with a 1 inch steel plate
Voltage 120 AC Only
Drill Capacity 1/2 in.
No Load Speed 600 RPM
Tap Capacity 5/8 in.-18
Drill Point Pressure 1,610/1,650 lbs.
Chuck or Taper Chuck
Tool Weight 8.0 lbs.
Shipping Weight 9.7 lbs.