| Customer
Service |
| |
Order Online:
You can have complete confidence when ordering products through Contractors
Supply. All transactions are processed through state of the art secured
technology.
Order By Phone: Customer Service Hours Monday-Friday 7:30a.m.-5:00p.m.
CST 1-920-882-0640 |
|
|
|
|
|
| Customer
Service Hours: 7:30am - 5:00pm CST Mon-Fri |
|
|
|
| |
|
Miller Welding Helmets
|
Elite Series
UnitedAssociation |
ID:
229364
|
 |
|
|
|
Elite™ Series Auto-Darkening Welding Helmet
The new Elite welding helmet features a 30% larger viewing area! The new Lens Technology requires no recharging! It is battery-powered with solar-assist for exceptionally long life, no recharging required. The Elite lens responds to extremely low DC inverter TIG arcs and four independent arc sensors provide continuous arc-sensing capability for demanding applications.
- 30% larger viewing area than our XLi and XLix Series lenses. The #4 ultra-clear light-state makes set-up and repositioning more efficient while providing continuous UV and IR protection.
- Lens technology responds to extremely low-amperage TIG arcs (5 amps and below), including DC inverter TIG. Battery-powered (replaceable), with solar-assist for exceptionally long life (3,000 hours on MIG), no recharging required! Lens darkening reaction time is 1/20,000 sec.
- Four independent arc sensors provide continuous arc-sensing capability for your most demanding applications - highly recommended for low amperage TIG!
- Analog controls provide quick concise adjustments. 9-13 Shade Control, Lens Sensitivity and Delay (.10-1.0 sec) are all internally adjusted. Features auto-off circuitry at 15-20 minutes, and low-battery indicator.
- Lightweight, comfortable and well-balanced design - At 1 lb 2 oz (510 g) it's a full four ounces lighter than our closest competitor. Includes our exclusive fatigue reducing Comfort Cushion, Helmet Bag, and Replacement Cover Lenses. A combined $25.00 value!
- Rubber spatter gasket provides excellent lens protection and is easily changed. Helmet comes complete with replacement lens shields (5 outside lens shields and 2 inside lens shields).
- Excellent magnifying lens holding system holds magnifying lens securely in place while allowing for vertical adjustment.
- 2-year limited warranty. -10°C to +55°C (14°F to 131°F) Operating Temperature. ANSI, CSA Approved
Quick Specs
| Lens Speed |
1/20,000 sec |
| Shade Control |
9-13 Internal Adjustment |
| Sensitivity Control |
Internal Adjustment |
| Delay Control |
.10-1.0 sec |
| Viewing Field |
97 x 60 mm (3.85 x 2.38 in) |
| Number of Arc Sensors |
4 |
| Lens Power Control |
Manual-on, auto-off |
| Low Amp TIG Rated |
5 amps |
| Inverter Capable |
Yes |
| Battery Life |
3,000 hours (2) |
| Magnifying Lens Holder |
Yes |
| Weight |
18oz (510g) |
| Light State |
#4, provides continuous UV and IR protection |
|
| |
|
|
|
|
| |
|
|
|
|
